Comparative Study of Blends of Polyvinyl Chloride/Poly Methyl-methacrylate and Polystyrene/Poly Methyl-methacrylate using Density, Viscometry and FTIR Methods
Keywords:
Comparative, blends, polyvinyl chloride, poly (methylmethacrylate), polystyrene, density, viscometry, FTIRAbstract
Authors: S. Akpan, E. O. Akinwande, D. S. Daniel, L. Y. Zango, J. E. Akpan, A. A. Samuel
Polyvinyl chloride, poly (methacrylate) and Polystyrene are frequently use polymers but in considering the chemical and physical properties, some of them suffer from mechanical and other failures such as instability, rigidity, and non-biodegradability etc. This study is aimed investigating the compatibility of various blends of polyvinyl versus poly (methyl methacrylate) as well as blends from polystyrene and poly (methyl methacrylate) (in chloroform solvent) using density, viscometry and Fourier transformed infra-red spectroscopy methods. The results obtained indicated that PV/PMMA blends have good degree of compatibility while PS/PMMA blends did not show any observable compatibility.
Downloads
Published
Issue
Section
Similar Articles
- Musaddiq Sirajo, Abubakar Umar, Mardhiyya Falalu, Maimuna Ahmad Aliyu, Regularization Techniques: A Comparative Analysis of Ridge, Lasso, and Elastic Net Approaches in Predicting Mental Health Consequences Using Mental Health Survey Dataset , Communication In Physical Sciences: Vol. 12 No. 5 (2025): VOLUME 12 ISSUE 5
- Ahmad Ahmad, Kehinde Israel Omoniyi, Nwokem Nsidibeabasi Calvin, Shuaibu Musa, Ugwoke Augustina Oyibo, Synthesis of Fe3O4 Nanoparticles Using Lichen (Collema ABU01502) Extract and their Application in the Removal of 4-Nitrophenol from Aqueous Solution , Communication In Physical Sciences: Vol. 12 No. 8 (2025): VOLUME 12 ISSUE 8
- Fabian James Umoren, Mfon Clement Utin, Resource Recovery from Maize Wastes; Synthesis and Characterization of Silicon Oxide Nanoparticles , Communication In Physical Sciences: Vol. 11 No. 3 (2024): VOLUME 11 ISSUE 3
- E. Danladi, The Effect of Glass–Kevlar 49 Fibre Loading on the Mechanical, Thermal and Physical Properties of Polypropylene Hybrid Composites , Communication In Physical Sciences: Vol. 5 No. 2 (2020): VOLUME 5 ISSUE 2
- I. I. Ibrahim, A. Absulazeez, A. Usman, M. U. Badeggi, A. I. Muhammad, Comparative Studies on Phytochemical Constituents Andantimicrobial Activity on Three Onion Species , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- Kingsley Uchendu, Emmanuel Wilfred Okereke, Exponentiated Power Ailamujia Distribution: Properties and Applications to Time Series , Communication In Physical Sciences: Vol. 12 No. 5 (2025): VOLUME 12 ISSUE 5
- Yunusa Habibat, Omoniyi K. Isreal, Stephen Abechi, Aroh A. Oyibo, Owolabi A. Awwal, Imam Naziru, Green Synthesis of Titanium Oxide (TiO2) Nanoparticles Using Phyllanthus Niruri and Assessment of Its Antibacterial Activity in Wastewater Treatment , Communication In Physical Sciences: Vol. 10 No. 1 (2023): VOLUME 10 ISSUE 1
- Abdullahi Usman, Ruth O. Onore, Osebuohien A. Oforghor, Jibrin Mohammed, Nasiru L. Usman, Total Phenolic and Flavonoid Contents, Antioxidant Activity and Phytochemical Screening of Calotropis Procera Stem Bark Extracts , Communication In Physical Sciences: Vol. 5 No. 3 (2020): VOLUME 5 ISSUE 3
- Tope Oyebade, Chemical Pollutants and Human Vulnerability: An Integrated Review of Environmental Chemistry and Public Health , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
- Abubakar Aliyu Umar, Aminu Ismaila, Khaidzir Hamza, Lattice Calculations and Power Distribution for Nigeria Research Reactor-1 (NIRR-1) using Serpent Code , Communication In Physical Sciences: Vol. 10 No. 1 (2023): VOLUME 10 ISSUE 1
You may also start an advanced similarity search for this article.