Comparative Study of Blends of Polyvinyl Chloride/Poly Methyl-methacrylate and Polystyrene/Poly Methyl-methacrylate using Density, Viscometry and FTIR Methods
Keywords:
Comparative, blends, polyvinyl chloride, poly (methylmethacrylate), polystyrene, density, viscometry, FTIRAbstract
Authors: S. Akpan, E. O. Akinwande, D. S. Daniel, L. Y. Zango, J. E. Akpan, A. A. Samuel
Polyvinyl chloride, poly (methacrylate) and Polystyrene are frequently use polymers but in considering the chemical and physical properties, some of them suffer from mechanical and other failures such as instability, rigidity, and non-biodegradability etc. This study is aimed investigating the compatibility of various blends of polyvinyl versus poly (methyl methacrylate) as well as blends from polystyrene and poly (methyl methacrylate) (in chloroform solvent) using density, viscometry and Fourier transformed infra-red spectroscopy methods. The results obtained indicated that PV/PMMA blends have good degree of compatibility while PS/PMMA blends did not show any observable compatibility.
Downloads
Published
Issue
Section
How to Cite
Similar Articles
- Paul A. P. Mamza, Casmir E. Gimba , S. A. Yaro, Study on the Mechanical Properties of Low- Density Polyethylene Cow Horn Powder Composite , Communication In Physical Sciences: Vol. 8 No. 2 (2022): VOLUME 8 ISSUE 2
- Shuaibu Musa Abubakar, Aliyu Suleiman, Mohammed Abdullahi Baba, Shamsuddeen Umar Abdullahi, Aminu Adamu Bayero, Jamilu Musa Babangida, Investigation of the Effect of Gum Arabic-Rice Husk Hybrid Filler on the Mechanical Properties of Polystyrene Composite , Communication In Physical Sciences: Vol. 12 No. 7 (2025): VOLUME 12 ISSUE 7
- Victor Emaikwu, Corrosion Protection Performance of SiO₂ Nanoparticle-Reinforced Epoxy Coatings on Mild Steel in Chloride Environments Under Various Experimental Conditions , Communication In Physical Sciences: Vol. 13 No. 12 (2026): Vol13m issue 12
- Ugoetan Victor Agbogo, Rifore Belief Silas, Victor Inioluwa Olaoye, Philip Ifeanyi Jerome, Mathew Joshua, Investigation of the Inhibitive Properties of Bio-Inspired Starch-Polyvinyl Acetate Graft Copolymer (Ps-Pvagc) on the Acid Corrosion of Mild Steel , Communication In Physical Sciences: Vol. 10 No. 2 (2023): VOLUME 10 ISSUE 2
- Henrietta Ijeoma Kelle , Musa Runde, Valorization of an Agricultural Waste-Corncob: Investigation of Potassium Oxide from Corncob Ash Crystals as an Antiseptic and Disinfectant Agent , Communication In Physical Sciences: Vol. 11 No. 2 (2024): VOLUME 11 ISSUE 2
- M. M. Ndamitso, M. Musah, J. T. Mathew, V. T. Bissala, Comparative Nutritional Analysis of Daddawa Made from Fermented Parkia biglobosa and Glycine max Seeds , Communication In Physical Sciences: Vol. 5 No. 3 (2020): VOLUME 5 ISSUE 3
- Gideon Wyasu, Batch adsorption of Hg2+ and As3+ ions in Hospital wastewater using activated carbon from Balanites aegyptiaca and Detarium microcarpum , Communication In Physical Sciences: Vol. 5 No. 4 (2020): VOLUME 5 ISSUE 4
- Nyeneime William Akpanudo, Electrochemical Performance and Corrosion Protection of Zinc–Carbon Quantum Dot (Zn–CQD) Nanocomposite Coatings on Mild Steel , Communication In Physical Sciences: Vol. 13 No. 7 (2026): Volume 13, Issue 7
- Onanuga Omotayo Aina, Titus Morrawa Ryaghan, Bello Musa Opeyemi, Momoh Daniel Clement, Goat Horn Biochar as a Low-Cost Adsorbent for the Removal of Cadmium and Zinc ions in Aqueous Solution , Communication In Physical Sciences: Vol. 10 No. 3: VOLUME 10 ISSUE 3 (2023-2024)
- Isah Haruna, Yahaya Zakari, Umar Kabir Abdullahi, Reuben Oluwabukunmi David, Jamilu Yunusa Falgore, On the Study of Kumaraswamy Reduced Kies Distribution: Properties and Applications , Communication In Physical Sciences: Vol. 12 No. 3 (2025): VOLUME 12 ISSUE 3
You may also start an advanced similarity search for this article.