Comparative Study of Blends of Polyvinyl Chloride/Poly Methyl-methacrylate and Polystyrene/Poly Methyl-methacrylate using Density, Viscometry and FTIR Methods
Keywords:
Comparative, blends, polyvinyl chloride, poly (methylmethacrylate), polystyrene, density, viscometry, FTIRAbstract
Authors: S. Akpan, E. O. Akinwande, D. S. Daniel, L. Y. Zango, J. E. Akpan, A. A. Samuel
Polyvinyl chloride, poly (methacrylate) and Polystyrene are frequently use polymers but in considering the chemical and physical properties, some of them suffer from mechanical and other failures such as instability, rigidity, and non-biodegradability etc. This study is aimed investigating the compatibility of various blends of polyvinyl versus poly (methyl methacrylate) as well as blends from polystyrene and poly (methyl methacrylate) (in chloroform solvent) using density, viscometry and Fourier transformed infra-red spectroscopy methods. The results obtained indicated that PV/PMMA blends have good degree of compatibility while PS/PMMA blends did not show any observable compatibility.
Downloads
Published
Issue
Section
How to Cite
Similar Articles
- Saidu Usman, Comparative Study of Nutrient Compositions of Some Selected Cereal Grains Available in Shuwarin Market, Jigawa State, Nigeria , Communication In Physical Sciences: Vol. 9 No. 2 (2023): VOLUME 9 ISSUE 2
- Kabiru Usman, H. Abba, O. R. A. Iyun, Preparation and Characterization of African Star Apple Seed Shell (Chrysophyllum Africanum) For The Removal of Acid Red 9 , Communication In Physical Sciences: Vol. 8 No. 1 (2022): VOLUME 8 ISSUE 1
- M. T. Bisiriyu, Fractionation and Characterization of Asphaltenic and Resinous Fractions of Natural Bitumen , Communication In Physical Sciences: Vol. 5 No. 2 (2020): VOLUME 5 ISSUE 2
- Patricia Adamma Ekwumemgbo, Gideon Adamu Shallangwa, Idongesit Edem Okon, Ibe Awodi, Green Synthesis and Characterization of Iron Oxide Nanoparticles using Prosopis Africana Leaf Extract , Communication In Physical Sciences: Vol. 9 No. 2 (2023): VOLUME 9 ISSUE 2
- Thomas Ndidi Asiwe, Idongesit Bassey Anweting, Atim Sunday Johnson, Nzikahyel Simon, Solomon Enejo Shaibu, Eco-Friendly Synthesis and Characterization of Silver and Zinc Nanoparticles Using Aqueous Extract from the Bark of Antiaris toxicaria , Communication In Physical Sciences: Vol. 12 No. 1 (2024): VOLUME 12 ISSUE 1
- K. G. Ta'awu, M. C. Ekanem, A. Mairo, P. G. Udofia, Sensory and market attributes of wheat-Musa. spp-soybean (WPS) flour composite bread , Communication In Physical Sciences: Vol. 5 No. 2 (2020): VOLUME 5 ISSUE 2
- Dr EJIKEME EZO IGBOKWE, Dr Elizabeth Chinyere Nwaokorongwu, Dr Anthony Kalu Uchechukwu, Eke Chukwu Emole, Defect-Dominated Performance Limits in FASnIā Perovskite Solar Cells: A Thickness-Dependent Simulation Study , Communication In Physical Sciences: Vol. 13 No. 5 (2026): VOLUME 13 ISSUE 5
- Joseph Jacob, Shinggu D. Yamta, Influence of Moisture Absorption on some Mechanical Properties of Groundnut Shell Powder Reinforced Waste LDPE Composites , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- Zalihat Abdullahi, Chukwuebuka Odinakachukwu Nweke, Abdumumin Sumaila, Gideon Philip Azaki, Green Synthesis of Titanium Oxide Nanoparticles Using Murraya Paniculata Leaf Extract for Enhanced Photocatalytic Degradation of Congo Red , Communication In Physical Sciences: Vol. 13 No. 4 (2026): Volume 13 Issue 4
- Godwin Ezikanyi Okey, Yusuf Jibril, G. A. Olarinoye, Comparative Analyses amongst 3 Hybrid Controllers - MPC-HGAFSA, LQR-HGAFSA and PID-HGAFSA in a Micro Grid Power System Using MAD and RMSE as Measures of Performance Metrics , Communication In Physical Sciences: Vol. 10 No. 1 (2023): VOLUME 10 ISSUE 1
You may also start an advanced similarity search for this article.