Enhancing AgBiS2 Solar Cell Efficiency: Buffer Layer Comparison and Parameter Optimization
Keywords:
Buffer layer, AgBiS2, Defect densityAbstract
This research presents a comprehensive numerical simulation-based examination of AgBiS2 thin-film solar cell optimization, investigating various device parameters and buffer layer materials. The study evaluates the performance of CdS, CdZnS, and ZnS buffer layers, both with and without an Sb2S3 back surface field (BSF), utilizing SCAPS-1D simulation software. Findings indicate that CdZnS outperforms other buffer materials, achieving a maximum efficiency of 14.81% when combined with the Back Surface Field (BSF). The investigation analyzes the impact of multiple factors, including absorber layer thickness, defect density, temperature, and parasitic resistances. An optimal absorber thickness of 250 nm is identified, while the negative effects of increasing defect density and series resistance are demonstrated. Among the examined buffer materials, CdZnS exhibits superior thermal stability, maintaining high performance across a wide range of temperatures, and thus emerges as a promising candidate for high-temperature solar cell applications. The study emphasizes the advantageous characteristics of AgBiS2, particularly its high absorption coefficient and appropriate band gap, establishing its potential for photovoltaic applications.
Downloads
Published
Issue
Section
How to Cite
Similar Articles
- Juliet E. Emudianughe, P. M. Eze, Sunday Utah, Porosity And Permeability Trend In Agbami-Field Using Well Log, Offshore, Niger Delta , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- Hassan Abdulsalam, Dr Fatima Musa Lariski, Effect of Cerium on the Dielectric and structural Properties of Barium Titanate-based ceramics for multilayer ceramic capacitors , Communication In Physical Sciences: Vol. 12 No. 5 (2025): VOLUME 12 ISSUE 5
- Akeem B. Disu, Emmanuel Omokhuale, Effects of Injection and Heat Sink/Source on Convective Kuvshinki Fluid through a Porous Medium , Communication In Physical Sciences: Vol. 8 No. 2 (2022): VOLUME 8 ISSUE 2
- Yakubu Azeh, Spectroscopic Characterization of Acetylated Wood Flakes and Its High-Density Polyethylene Blends , Communication In Physical Sciences: Vol. 8 No. 1 (2022): VOLUME 8 ISSUE 1
- Mercy Uwem Useh, Danlami Uzama, Patrick Obigwa, Effects of Abattoir Activities in the Surrounding Soils within Abuja, Nigeria , Communication In Physical Sciences: Vol. 8 No. 1 (2022): VOLUME 8 ISSUE 1
- Isah Haruna, Yahaya Zakari, Umar Kabir Abdullahi, Reuben Oluwabukunmi David, Jamilu Yunusa Falgore, On the Study of Kumaraswamy Reduced Kies Distribution: Properties and Applications , Communication In Physical Sciences: Vol. 12 No. 3 (2025): VOLUME 12 ISSUE 3
- Babatunde Ogunyemi, Quantum Chemical Insights into the Antioxidant Mechanisms of Luteolin and Isorhamnetin: Elucidating Structure-Reactivity Relationships, Pharmacokinetics, and Toxicity for Therapeutic Potential , Communication In Physical Sciences: Vol. 12 No. 3 (2025): VOLUME 12 ISSUE 3
- M. Musah, M. M. Ndamitso, H. Yerima, J. T. Mathew, G. O. Iwuchukwu, Nutritional Assessment of Vigna unguiculata sub spp. sesquipedalis Seeds , Communication In Physical Sciences: Vol. 5 No. 4 (2020): VOLUME 5 ISSUE 4
- M. M. Ndamitso, M. Musah, J. T. Mathew, V. T. Bissala, Comparative Nutritional Analysis of Daddawa Made from Fermented Parkia biglobosa and Glycine max Seeds , Communication In Physical Sciences: Vol. 5 No. 3 (2020): VOLUME 5 ISSUE 3
- E. Danladi, The Effect of Glass–Kevlar 49 Fibre Loading on the Mechanical, Thermal and Physical Properties of Polypropylene Hybrid Composites , Communication In Physical Sciences: Vol. 5 No. 2 (2020): VOLUME 5 ISSUE 2
You may also start an advanced similarity search for this article.



