Dynamic Mechanical Properties and Surface Morphology of Glass/Jute/Kevlar Fibres reinforced Hybrid Composite
Keywords:
DMA, SEM, Jute fibre, Glass fibre, Kevlar fibreAbstract
Elijah Danladi*, Paul.A.P. Mamza, S.A. Yaro, M.T. Isa, E. R. Sadiku and S.S. Ray
The strength and application of polymers can significantly be affected by their mechanical properties, which indicates that measures aimed at altering their mechanical properties will also affect their strength and possible applications The purpose of this study is to investigate the dynamic mechanical properties of the glass/jute /Kevlar hybrid fibres reinforced polypropylene using dynamic mechanical analysis, (DMA) to establish the interfacial bond in relation to storage modulus, loss modulus and damping factor. The samples were prepared using Carver Press at a temperature of 190 oC and a pressure of 500 psi using 1 mm thin films of polypropylene. The results obtained showed that the hybrid composites have a poor interfacial bond which led to molecular motion as the temperature was increasing. The loss modulus was also high, likewise the damping factor. The Scanning Electron Microscope (SEM) micrograms also supported these findings by showing the delamination on impacted samples. These make the hybrid composite a good material for rigid body armor application.
Downloads
Published
Issue
Section
Similar Articles
- Felix Bamidele Fatoye, Michael Adewale Ibitomi, Quality Evaluation of Udane–Biomi Coal in the Northern Anambra Basin of Nigeria , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- Uche Ibeneme, Kevin Ejiogu, Aiyejagbara Mosunade, Egere Chidi, Zango Leo, Onyemachi David, Mechanical and Morphological Characterization of Recycled Low Density Polyethylene and Polystyrene Blends at Varying Compositions , Communication In Physical Sciences: Vol. 11 No. 4 (2024): VOLUME 11 ISSUE 4
- Yakubu Azeh, Spectroscopic Characterization of Acetylated Wood Flakes and Its High-Density Polyethylene Blends , Communication In Physical Sciences: Vol. 8 No. 1 (2022): VOLUME 8 ISSUE 1
- Thomas Ndidi Asiwe, Idongesit Bassey Anweting, Atim Sunday Johnson, Nzikahyel Simon, Solomon Enejo Shaibu, Eco-Friendly Synthesis and Characterization of Silver and Zinc Nanoparticles Using Aqueous Extract from the Bark of Antiaris toxicaria , Communication In Physical Sciences: Vol. 12 No. 1 (2024): VOLUME 12 ISSUE 1
- Elizabeth Chinyere Nwakorongwu, Patricia Uchechi. Kanayochi-Okpechi, Ugochukwu Joseph, Effects of Annealing Temperature on the Dual Solution Synthesis and Optical Characterization of AlS: ZnS Thin Films , Communication In Physical Sciences: Vol. 11 No. 1 (2024): VOLUME 11 ISSUE 1
- Abdulfatai A. Otori, Akeem A. Jimoh, John T. Mathew, Development of Heterogeneous Catalyst from Waste Cow Bone Using Parinarium Macrophylum Seed Oil for Biodiesel Production , Communication In Physical Sciences: Vol. 7 No. 3 (2021): VOLUME 7 ISSUE 3
- Yunusa Habibat, Omoniyi K. Isreal, Stephen Abechi, Aroh A. Oyibo, Owolabi A. Awwal, Imam Naziru, Green Synthesis of Titanium Oxide (TiO2) Nanoparticles Using Phyllanthus Niruri and Assessment of Its Antibacterial Activity in Wastewater Treatment , Communication In Physical Sciences: Vol. 10 No. 1 (2023): VOLUME 10 ISSUE 1
- Joseph Jacob, Shinggu D. Yamta, Influence of Moisture Absorption on some Mechanical Properties of Groundnut Shell Powder Reinforced Waste LDPE Composites , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- Kehinde Israel Omoniyi1, Zaharaddeen Nasir Garba, Mustapha Yusuf Hamza, Baba Abdullahi Alafara, Aroh Augustina Oyibo, Owolabi Ayowole Awwal, Dissolution Kinetics of the Hydrometallurgical Extraction of Tin from a Nigerian Cassiterite Ore Obtained From Jibia Local Government Katsina State , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
- Onanuga Omotayo Aina, Titus Morrawa Ryaghan, Bello Musa Opeyemi, Momoh Daniel Clement, Goat Horn Biochar as a Low-Cost Adsorbent for the Removal of Cadmium and Zinc ions in Aqueous Solution , Communication In Physical Sciences: Vol. 10 No. 3 (2023): VOLUME 10 ISSUE 3
You may also start an advanced similarity search for this article.