The Recycling of Sawdust Waste into Particleboard Using Starch-Based Modified Adhesive
Keywords:
Resource recycling, particle board, cassava processing waste, wood saw dustAbstract
The challenges associated with the management of wastes from the cassava processing and timber industries necessitated an investigation into the possibility of implementing recycling approach to produced particle board from these wastes. Particleboards were produced from wood saw dust using various compositions of modified starch adhesives. The product obtained were evaluated for density, moisture content, hardness, flexural strength, water absorption and thickness swelling. The results obtained indicated that the density ranged from 753 to 798 kg/m3, moisture content ranged from 14.87 to 16.67 %, hardness ranged from 9.02 to 9.31 N/nm2, flexural strength ranged from 1.31 to 1.45 MPa, water absorption capacity at 24 h ranged from 1.06 to 9.31 %, thickness swelling ranged from 4.55 to 4.78%. The products were in conformity with IS 3087 (2005) and ANSI A 208.1 (1993) standards and could go for medium density particleboard.
Published
Issue
Section
How to Cite
Similar Articles
- Anduang Ofuo Odiongenyi, Removal of Ethyl Violet Dye from Aqueous Solution by Graphite Dust and Nano Graphene Oxide Synthesized from Graphite Dust , Communication In Physical Sciences: Vol. 4 No. 2 (2019): VOLUME 4 ISSUE 2
- Ikenna Duruanyim, Emmanuel Victory Enyinnaya, Ifiok Dominic Ufia, Okoi Ina (Jnr.) Utum, Ayinya Johnathan Attah, Assessment of Resistance of Selected Nigerian Wood Species Treated with Rocket Fungicide and Mimosa pudica Linn. extracts against fungal infestation. , Communication In Physical Sciences: Vol. 12 No. 4 (2025): VOLUME1 2 ISSUE 4
- Tope Oyebade, Samuel Babatunde, Environmental Chemistry of Radioactive Waste Management , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
- Emurode Williams, Lawrence Abakah, Aniedi Ojo, Chidinma Jonah, AI-Driven Analysis of Information Processing Capacity and Financial Stability in Delegated Asset , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
- Ikenna Emmanuel Duruanyim, Jacob Mayowa Owoyemi, Olubunmi Oluseyi Fabiyi, Ifiok Dominic Uffia, Development and Characterization of a Bio-Based Wood Preservative from Terminalia mantaly, Albizia lebbeck and Lemon Peel Oil Blend , Communication In Physical Sciences: Vol. 13 No. 8 (2026): Volume 13, Issue 8
- N. B. Essien, Sorghum Waste as an Efficient Adsorbent for the Removal of Zn2+and Cu2+ from Aqueous Medium , Communication In Physical Sciences: Vol. 5 No. 2 (2020): VOLUME 5 ISSUE 2
- Moses Oluwasegun Odewale, Moses Olagoke Odejobi, Olanrewaju Oluwaseun Ajayi, Machine Learning-Based Predictive Congestion Management and Dynamic Resource Allocation in 5G Networks. , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
- Uwaisu Yusuf, Paul A. P. Mamza, Casimir Emmanuel Gimba, Effect of Isoberlina Wood Fillers on the Mechanical and Thermal Properties of PVC Composites , Communication In Physical Sciences: Vol. 6 No. 1 (2020): VOLUME 6 ISSUE 1
- Joseph Jacob, Shinggu D. Yamta, Influence of Moisture Absorption on some Mechanical Properties of Groundnut Shell Powder Reinforced Waste LDPE Composites , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- Martins Moses, John Stanley, Adam Aliyu, Benjamin Biko, Synthesis and Characterization of Graphene Oxide Nanoparticles Using Graphite Dust , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
You may also start an advanced similarity search for this article.