The Recycling of Sawdust Waste into Particleboard Using Starch-Based Modified Adhesive
Keywords:
Resource recycling, particle board, cassava processing waste, wood saw dustAbstract
The challenges associated with the management of wastes from the cassava processing and timber industries necessitated an investigation into the possibility of implementing recycling approach to produced particle board from these wastes. Particleboards were produced from wood saw dust using various compositions of modified starch adhesives. The product obtained were evaluated for density, moisture content, hardness, flexural strength, water absorption and thickness swelling. The results obtained indicated that the density ranged from 753 to 798 kg/m3, moisture content ranged from 14.87 to 16.67 %, hardness ranged from 9.02 to 9.31 N/nm2, flexural strength ranged from 1.31 to 1.45 MPa, water absorption capacity at 24 h ranged from 1.06 to 9.31 %, thickness swelling ranged from 4.55 to 4.78%. The products were in conformity with IS 3087 (2005) and ANSI A 208.1 (1993) standards and could go for medium density particleboard.
Published
Issue
Section
How to Cite
Similar Articles
- Abdulfatai A. Otori, Akeem A. Jimoh, John T. Mathew, Development of Heterogeneous Catalyst from Waste Cow Bone Using Parinarium Macrophylum Seed Oil for Biodiesel Production , Communication In Physical Sciences: Vol. 7 No. 3 (2021): VOLUME 7 ISSUE 3
- Ubong Ime Essien, Anduang Odiongenyi, Clement Obadimu, Iniobong Enengedi, Investigation of Snail shells as an Adsorbent and Precursor for the synthesis of Calcium Oxide Nanoparticles for the Removal of Amoxicillin from Aqueous Solution , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
- Chinyan Blessing, Sharon Oluwaseun, Taiwo Ruth Owoeye, Arti Raikwar, Beyond Automation: Data-Driven Financial Process Optimization and Organizational Transformation in Financial Services , Communication In Physical Sciences: Vol. 12 No. 8 (2025): VOLUME 12 ISSUE 8
- Nsikak Bassey Essien, Rice Husk as Precursor for Silicon Oxide Nanoparticles: Synthesis and Characterization , Communication In Physical Sciences: Vol. 11 No. 4 (2024): VOLUME 11 ISSUE 4
- Kehinde Israel Omoniyi1, Zaharaddeen Nasir Garba, Mustapha Yusuf Hamza, Baba Abdullahi Alafara, Aroh Augustina Oyibo, Owolabi Ayowole Awwal, Dissolution Kinetics of the Hydrometallurgical Extraction of Tin from a Nigerian Cassiterite Ore Obtained From Jibia Local Government Katsina State , Communication In Physical Sciences: Vol. 9 No. 4 (2023): VOLUME 9 ISSUE 4
- Vincent Oseikhuemen Odia-Oseghale, Joseph Odion Odia-Oseghale, Environmental Implications of Quarrying and Waste Management: A Case Study of Okhoro, Benin City , Communication In Physical Sciences: Vol. 12 No. 4 (2025): VOLUME1 2 ISSUE 4
- Uche Ibeneme, Kevin Ejiogu, Aiyejagbara Mosunade, Egere Chidi, Zango Leo, Onyemachi David, Mechanical and Morphological Characterization of Recycled Low Density Polyethylene and Polystyrene Blends at Varying Compositions , Communication In Physical Sciences: Vol. 11 No. 4 (2024): VOLUME 11 ISSUE 4
- Henrietta Ijeoma Kelle , Musa Runde, Valorization of an Agricultural Waste-Corncob: Investigation of Potassium Oxide from Corncob Ash Crystals as an Antiseptic and Disinfectant Agent , Communication In Physical Sciences: Vol. 11 No. 2 (2024): VOLUME 11 ISSUE 2
- Gideon Wyasu, Batch adsorption of Hg2+ and As3+ ions in Hospital wastewater using activated carbon from Balanites aegyptiaca and Detarium microcarpum , Communication In Physical Sciences: Vol. 5 No. 4 (2020): VOLUME 5 ISSUE 4
- Vincent Oseikhuemen Binitie, Ogaga Esharive, Solid mineral potential in the southern Benue Trough: A review , Communication In Physical Sciences: Vol. 11 No. 4 (2024): VOLUME 11 ISSUE 4
You may also start an advanced similarity search for this article.