Design and Implementation of an IoT Microcontroller Power Protection and Control System
Keywords:
IOT, Microcontroller, Low voltage, High voltage, 220 voltsAbstract
Unstable power supply is a persistent challenge in Nigeria, necessitating effective voltage regulation solutions. This study presents the design and implementation of an Internet of Things (IoT)-based microcontroller voltage stabilizer for power protection and control. The system automatically detects abnormal voltage levels—low, high, and over-voltage conditions—and corrects them to maintain a stable output of approximately 220 volts. Using a microcontroller and the Blynk application, the device enables real-time wireless monitoring of voltage levels. Experimental tests confirmed that the device could regulate input voltages ranging from 140 V to 250 V, ensuring a consistent output voltage near 220 V. The proposed solution offers a reliable, cost-effective, and efficient alternative to commercial stabilizers and demonstrates minimal thermal risk during operation
Similar Articles
- Habu Tela Abba, Agada Livinus Emeka, Population Doses from Gamma Radiation Exposure around Damaturu Metropolis, Yobe State, Nigeria , Communication In Physical Sciences: Vol. 5 No. 2 (2020): VOLUME 5 ISSUE 2
- Dr Fatai Afolabi, Mr Ismaila Jide Olawale, Professor Sunday 0. 0ladoye, Physicochemical, Phytochemical and Gas Chromatography- Mass Spectrometric Analyses of Gmelina Arborea Root Hexane Extract , Communication In Physical Sciences: Vol. 12 No. 6 (2025): Volume 12 ISSUE 6
- Azuka Ocheli, Godwin Okumagbe Aigbadon, Nkonyeasua Abanjo, Subsurface Lithologies and Rock Eval Pyrolysis Analyses of Amansiodo-I and Akukwa-1 Well Sections, Nkporo Formation, Southeastern Part of the Anambra Basin, Nigeria: Implication for Petroleum Source Rock Potentials , Communication In Physical Sciences: Vol. 9 No. 2 (2023): VOLUME 9 ISSUE 2
- Isaac Chukwutem Abiodun, Monday Edward Edem, Obasesam Ebri Agbor, Investigation of the Structural and electronic properties of Ternary AB₂X₄ based material via Density Functional Theory (DFT) for Optoelectronic Applications , Communication In Physical Sciences: Vol. 12 No. 1 (2024): VOLUME 12 ISSUE 1
- Abubakar Aliyu Umar, Aminu Ismaila, Khaidzir Hamza, Lattice Calculations and Power Distribution for Nigeria Research Reactor-1 (NIRR-1) using Serpent Code , Communication In Physical Sciences: Vol. 10 No. 1 (2023): VOLUME 10 ISSUE 1
- Efe Jessa, Soil Stabilization Using Bio-Enzymes: A Sustainable Alternative to Traditional Methods , Communication In Physical Sciences: Vol. 2 No. 1 (2017): VOLUME 2 ISSUE 1
- 1. Anthony I. G. Ekedegwa, Evans Ashiegwuike, Enhanced Firefly Algorithm Inspired by Cell Communication Mechanism and Genetic Algorithm for Short-Term Electricity Load Forecasting , Communication In Physical Sciences: Vol. 12 No. 3 (2025): VOLUME 12 ISSUE 3
- Elijah Danladi, Paul. A.P. Mamza, S Yaro, M. T Isa, E. R Sadiku, Dynamic Mechanical Properties and Surface Morphology of Glass/Jute/Kevlar Fibres reinforced Hybrid Composite , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- E. Danladi, The Effect of Glass–Kevlar 49 Fibre Loading on the Mechanical, Thermal and Physical Properties of Polypropylene Hybrid Composites , Communication In Physical Sciences: Vol. 5 No. 2 (2020): VOLUME 5 ISSUE 2
- Florence Omada Ocheme, Hakeem Adewale Sulaimon, Adamu Abubakar Isah, A Deep Neural Network Approach for Cancer Types Classification Using Gene Selection , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
You may also start an advanced similarity search for this article.