Investigation of the Effect of Gum Arabic-Rice Husk Hybrid Filler on the Mechanical Properties of Polystyrene Composite
Keywords:
Polystyrene, Gum arabic, Ricehusk, Hibrid filler, Mechanical propertiesAbstract
This study investigates the effect of Gum Arabic-Rice Husk (GA-RH) on the mechanical properties of polystyrene (PS) composites. Polystyrene, widely used in packaging, construction, and electronics, faces limitations in mechanical strength and flammability. The GA-RH offers a natural, cost-effective reinforcement solution. The research evaluated PS composites with varying hybrid GA-RH filler compositions (from 100/0 to 80/20 PS/GA-RH proportion) through physical and mechanical tests such as tensile strength, hardness, and impact strength. Key findings revealed that the addition of GA-RH influenced the composite's density, water absorption, and mechanical performance. The optimal composition, 97.5 % PS and 2.5 % GA-RH, showed the highest tensile strength (32.13 MPa) and modulus of elasticity (434.46 MPa). While the hardness showed improvement up to 85 % PS and 15 % GA-RH. This study concluded that for applications requiring higher tensile strength and modulus up to 2.5 GA-RH in PS is recommended, while for improved hardness, up to 15% GA-RH in PS can be used.
Downloads
Published
Issue
Section
How to Cite
Similar Articles
- 1. Olowonefa Richard, 2. Auduson, Aaron Enechojo, Ologe Oluwatoyin, 4. Yusuf Odunsanwo , 5. Agbane Isaac Ojodomo, Geomechanical Characterization and In-Situ Stresses Analysis for Predicting CO₂ Storage Potential: A Case Study of Toba Field, Niger Delta , Communication In Physical Sciences: Vol. 12 No. 5 (2025): VOLUME 12 ISSUE 5
- Bayode Adeyanju, Development and Application of a Novel Bi-functional Heat Treatment Furnace: A Review , Communication In Physical Sciences: Vol. 12 No. 5 (2025): VOLUME 12 ISSUE 5
- Irene Edem Johncross, Fanifosi Seyi Josiah, Abidemi Obatoyinbo Ajayi, Resource recovery from Sugar Cane Biomass for the Synthesis of Silicon Nanoparticles , Communication In Physical Sciences: Vol. 12 No. 1 (2024): VOLUME 12 ISSUE 1
- Naziru Imam, Isreal I. Omoniyi, Paul Ameh, Study of the Functional Groups Associated with the Corrosion Inhibition of Stainless Steel Arch Bar in Acidic Medium by Khaya Grandifolia Gum Exudate , Communication In Physical Sciences: Vol. 7 No. 4 (2021): VOLUME 7 ISSUE 4
- Bala Idris, Abdullahi Lawal, Dauda Abubakar, Saddiq Abubakar Dalhatu, Ab initio Calculation of CuSbSe2 in Bulk and Monolayer for Solar Cell and Infrared Optoelectronic Applications , Communication In Physical Sciences: Vol. 7 No. 3 (2021): VOLUME 7 ISSUE 3
- Adam Aliyu, Nuhu Amina Kirim, Silas Ishaku, Aliyu Sambo Abubakar, Isolation, Characterization and In Vitro Evaluation of Antioxidant and Anti-Inflammatory Properties of Boswellia Serrata Stem Bark from Jalingo, Taraba State , Communication In Physical Sciences: Vol. 13 No. 8 (2026): Volume 13, Issue 8
- N. S. Akpan, Compatibility Study of Polystyrene and Poly Methyl-methacrylate Blends using FTIR and Viscometry Methods , Communication In Physical Sciences: Vol. 4 No. 2 (2019): VOLUME 4 ISSUE 2
- Kelechi K. Ochommadu, Nwamaka I. Akpu, Okhuomaruyi D. Osahon, Comparative Evaluation of Bone and Some Materials Used as Bone Tissue Substitutes in Radiotherapy and Radiological Applications , Communication In Physical Sciences: Vol. 12 No. 3 (2025): VOLUME 12 ISSUE 3
- Nyeneime William Akpanudo, Ojeyemi Matthew Olabemiwo, Pore Parameters Analysis of Echinochloa pyramidalis leaf Dopped Silver Nanoparticles , Communication In Physical Sciences: Vol. 11 No. 4 (2024): VOLUME 11 ISSUE 4
- Funmilayo Ayedun, Probing the Effects of Atomic Position Changes on the Structural, Electronic, and Thermoelectric Properties of the Half-Heusler ZrPtPb Compound: A First-Principles Study , Communication In Physical Sciences: Vol. 12 No. 3 (2025): VOLUME 12 ISSUE 3
You may also start an advanced similarity search for this article.



